The RG2 panel is based on a 600mm-square module made of a high-density particle chipboard core in a galvanised steel outer. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity and static […]
RG5 Access Floor Panels
The RG5 panel is based on a 600mm-square module made of a high-performance high-density 30mm particle chipboard core in a galvanised steel envelope. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity […]
RG3 Access Floor Panels
The RG3 panel is based on a 600mm-square module made of a high-performance high-density particle chipboard core in a galvanised steel outer. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity and […]
RG6 Access Floor Panels
The RG6 panel is based on a 600mm-square module made of a high-performance high-density 30mm particle chipboard core in a galvanised steel envelope. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity […]
RHG600 Access Floor Panels
The RHG600 panel is based on a 600mm-square module made of a high-performance high-density 30mm particle chipboard core in a galvanised steel envelope. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity […]
RLG600 Access Floor Panels
The RLG600 panel is based on a 600mm-square module made of a 30mm high-density particle chipboard core in a galvanised steel outer. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity and […]
RMG600 Access Floor Panels
The RMG600 panel is based on a 600mm-square module made of a high-performance high-density 30mm particle chipboard core in a galvanised steel envelope. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity […]
TL5 Access Floor Panels
The TL5 panel is based on a 600mm-square module made of a high-performance high-density 25-mm particle chipboard core in a galvanised steel outer. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity […]
TLM26 Access Floor Panels
The TLM26 panel is based on a 600mm-square module made of a high-performance high-density 25-mm particle chipboard core in a galvanised steel outer. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity […]
Sopro Brillant® PerlFuge
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Gyproc Glasroc F MultiBoard
Glasroc F MultiBoards are developed using paper-free glass fibre technology and are non-combustible. They are quick and easy to install while still offering fire protection as well as impact and moisture resistance.
Gyproc Glasroc H TileBacker
Glasroc H TILEBACKER provides outstanding performance as a tile backing board and in environments where there is frequent exposure to water and moisture, such as kitchens, bathrooms, shower cubicles and wet rooms. The yellow pre-primed acrylic surface resists water, protecting the background and system, whilst providing an optimum surface key for direct tiling or decoration.
Gyproc Gypframe metal framing components
The UltraSTEEL® framework system for strong, lightweight installation
Gyproc Easi-Fill
Gyproc Easi-Fill is a filler finisher, meaning jointing with this product only requires two stages. High coverage rate and minimal drying shrinkage allows application in only two coats. Easy to mix, apply and sand, with 60 minutes working time and the second (final) coat can be applied in 140 minutes.
Gyproc Glasroc F Firecase
Glasroc F is predominately used as part of the FireCase frameless structural steel encasement system, giving up to 120 minutes fire protection and also used in the GypLyner ENCASE system, achieving up to 180 minutes fire protection. Non-combustible Glasroc F boards, developed using paper-free glass fibre technology, provide the basis for a range of steel […]
Unilin PIR Insulation Boards
This EPD is for Unilin (Polyisocyanurate) PIR insulation boards: CT/PIR, FR/ALU, FR/BGM, FR/MG, Thin-R, of thickness 100 mm, the R values quoted are minimum values and the EPD is calculated on this basis. The PIR boards typically comprise of primary raw materials MDI, polyol, flame retardant, pentane, with the addition of minor amounts of admixtures. […]
CWM and CWM-BG1 bitumen additives for warm-mix asphalt
CWM and CWM-BG1 are surface-active agents used as bitumen additives in the manufacture of warm-mix asphalt, in the road construction industry. The addition of these additives enables asphalt producers to lower their mixing temperature by the order of 35°C, compared to the temperatures normally used to make the more conventional “hot-mix” asphalt. Both CWM and […]
Ecotherm® double and triple glazed windows
This EPD is carried out for the Munster Joinery Ecotherm double and triple glazed windows. The raw materials for the Ecotherm windows comprise: glass, argon, uPVC and aluminium profiles, warm edge spacer, foam filler and associated hardware (hinges, handles, recievers and gears). The windows are manufactured in accordance with I.S. EN 14351-1:2006 +A1:2010 Windows and […]
- « Previous Page
- 1
- …
- 9
- 10
- 11
- 12
- 13
- …
- 15
- Next Page »