The FDEB6 panel is based on a 600mm-square module made of a high-performance high-density 30-mm particle chipboard core; both its top and bottom surface are laminated with galvanised-steel sheets. A resilient vinyl surface finish is laminated to the top surface before being trimmed to fit flush with the panel sides. The FDEB6 panel is encapsulated […]
RG2 Access Floor Panels
The RG2 panel is based on a 600mm-square module made of a high-density particle chipboard core in a galvanised steel outer. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity and static […]
RG3 Access Floor Panels
The RG3 panel is based on a 600mm-square module made of a high-performance high-density particle chipboard core in a galvanised steel outer. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity and […]
RG6 Access Floor Panels
The RG6 panel is based on a 600mm-square module made of a high-performance high-density 30mm particle chipboard core in a galvanised steel envelope. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity […]
RHG600 Access Floor Panels
The RHG600 panel is based on a 600mm-square module made of a high-performance high-density 30mm particle chipboard core in a galvanised steel envelope. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity […]
RLG600 Access Floor Panels
The RLG600 panel is based on a 600mm-square module made of a 30mm high-density particle chipboard core in a galvanised steel outer. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity and […]
RMG600 Access Floor Panels
The RMG600 panel is based on a 600mm-square module made of a high-performance high-density 30mm particle chipboard core in a galvanised steel envelope. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity […]
TL5 Access Floor Panels
The TL5 panel is based on a 600mm-square module made of a high-performance high-density 25-mm particle chipboard core in a galvanised steel outer. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity […]
TLM26 Access Floor Panels
The TLM26 panel is based on a 600mm-square module made of a high-performance high-density 25-mm particle chipboard core in a galvanised steel outer. The galvanised-steel shell comprises a top sheet that is wrapped around and laminated to the core, then mechanically-stitched to the bottom steel sheet for greater strength and to provide full electrical continuity […]
Sopro Brillant® PerlFuge
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Gyproc Gypframe metal framing components
The UltraSTEEL® framework system for strong, lightweight installation
Unilin PIR Insulation Boards
This EPD is for Unilin (Polyisocyanurate) PIR insulation boards: CT/PIR, FR/ALU, FR/BGM, FR/MG, Thin-R, of thickness 100 mm, the R values quoted are minimum values and the EPD is calculated on this basis. The PIR boards typically comprise of primary raw materials MDI, polyol, flame retardant, pentane, with the addition of minor amounts of admixtures. […]
Sopro’s No.1 silver 403 flexible tile adhesive
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro VS 582 Self Levelling Compound Lays to Falls
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro TitecFuge® plus 1-10 mm Grout
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro FugenEpoxi plus
Reactive resins based on epoxy resin, filled and/or aqueous filled. The reactive resins are manufactured in a two component process using reactively-diluted epoxy resins and polyamines. The aqueous systems can be formulated as aqueous dispersions on the resin or hardening agent side. They comply with multiple, often specific tasks in the construction, fitting and repair […]
Sopro Flexible Sealing Slurry RS 623
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
MEDITE VENT MDF
This EPD is carried out for the MEDITE VENT MDF panel. MEDITE MDF panels are manufactured in accordance with I.S. EN 622-5:2009, Fibreboards – Specifications, Part 5: Requirements for dry processed panels (MDF). The constituent raw materials of the MDF panels comprise: wood logs, wood chips and additives such as MDI, urea, resin, fire retardant […]
- « Previous Page
- 1
- …
- 6
- 7
- 8
- 9
- 10
- Next Page »