This is a Cradle to Gate EPD. The Modules that are declared are shown in the table below. As cement is an intermediate construction product – in that it becomes physically integrated into the product of which it is a component – it is generally not possible to provide information about the environmental impacts of […]
NorDan NTech Villa Topswing reversible – TG 92/67 (With Alumimium Cladding)
NorDan NTech Villa Topswing reversible – TG 92/67 (With Alumimium Cladding) Double Glazed
Sopro EPG 1522 Epoxy Primer
Low-emission, unpigmented, two-component liquid epoxy resin. Applied as primer to stabilize friable mineral substrates and as adhesion promoter on smooth substrates, e.g. metal, mastic asphalt and existing coatings. Applied as primer prior to laying large-format tiles on calcium sulphate screeds. Freshly applied primer is blinded with either Sopro QS 507 fine silica sand or Sopro […]
NorDan NTech Villa Fixed Frame – TL 92 (with Alumimium Cladding)
NorDan NTech Villa Fixed Frame – TL 92 (with Alumimium Cladding ) Double Glazed
CEM III A Dublin
Cements in accordance with standard EN 197-1
CEM III C Dublin
Cements in accordance with standard EN 197-1, used for the manufacture of concrete, mortars, grouts, coatings and other mixtures intended for construction and the manufacture of construction products.
Ground Granulated Blastfurnace Slag (GGBS) Dublin
Ecocem ggbs is a (latent) hydraulic binder made by finely grinding granulated blast furnace slag (GGBS). Ecocem ggbs is an “intermediate” product, i.e., a constituent to produce concrete, as well as mortar, masonry mortar, and other cement bound materials.
Superfine Dublin
Ecocem Superfine ggbs is a (latent) hydraulic binder made by finely grinding granulated blastfurnace slag (GGBS). Ecocem ggbs is an “intermediate” product, i.e., a constituent to produce concrete, as well as mortar, masonry mortar, and other cement bound materials.
QEF Aluminium Louvered Systems
This EPD is for one tonne of installed QEF aluminium louvered systems. The louvered systems are manufactured from bespoke extruded aluminium profiles, which are initially cut to precise lengths, and then powder coated and assembled in to 1.1 x 1.1 m2 panels, for installation on building facades. The QEF aluminium louvered systems are used as […]
KORE Fill Bonded Beads
This EPD is for KORE Fill Diamond cavity wall loose beads, black and KORE Fill Original cavity wall loose beads, silver. The insulation products are made entirely from expandable polystyrene (EPS) beads. The raw materials for all the insulation products are the same (expandable polystyrene beads) but some come from different manufacturers, however the finished […]
KORE EPS 200 and EPS 300
This EPD is for EPS 200 and EPS 300. The insulation products are made entirely from expandable polystyrene (EPS) beads. The raw materials for all the insulation products are the same (expandable polystyrene beads, white in colour). The insulation is manufactured to IS EN 13163:2012+A2:2016.
KORE EPS 150
This EPD is for EPS 150 White and EPS 150 Silver. The insulation products are made entirely from expandable polystyrene (EPS) beads. The raw materials for all the insulation products are the same (expandable polystyrene beads, white and silver) but come from different manufacturers. However, the finished products are the same, differing only in thermal […]
KORE EPS 100
This EPD is for EPS 100 White and EPS 100 Silver. The insulation products are made entirely from expandable polystyrene (EPS) beads. The raw materials for all the insulation products are the same (expandable polystyrene beads, white and silver) but come from different manufacturers. However, the finished products are the same, differing only in thermal […]
KORE EPS 70
This EPD is for EPS 70 White and EPS 70 Silver. The insulation products are made entirely from expandable polystyrene (EPS) beads. The raw materials for all the insulation products are the same (expandable polystyrene beads, white and silver) but come from different manufacturers. However, the finished products are the same, differing only in thermal […]
Sika MonoTop-3020
Sika MonoTop®-3020 is a 1-part, cementitious, polymer modified, low shrinkage surfacing/ finishing mortar. It contains recycled waste materials (supplementary cementitious materials) and can reduce the carbon footprint application activity calculations. Sika MonoTop®-3020 can be applied in layers with thickness between 1 and 5 mm, with a fresh density of 2.0 kg/L
Sika MonoTop-1010
Sika MonoTop®-1010 is a 1-part, cementitious, polymer-modified, coating material used as bonding primer and reinforcement corrosion protection. It contains recycled waste materials (supplementary cementitious materials) and can reduce the carbon footprint application activity calculations. Sika MonoTop®-1010 can be applied in layers with thickness of 1 mm, with a fresh density of 2.0 kg/L.
Sika MonoTop-4012
Sika MonoTop®-4012 is a 1-part, cementitious, fibre reinforced, low shrinkage repair mortar. It contains recycled materials (supplementary cementitious materials). Sika MonoTop®-4012 can be applied in layers with thickness between 6 and 120 mm, with a fresh density of 2.1 kg/L.
Sikaplan SGmA
Sikaplan® SGmA is multi-layer synthetic waterproofing sheet based on polyvinyl chloride (PVC) with an embedded glass fleece layer (DE/E1 PVC-P-NB-EGV). Sikaplan® SGmA waterproofing sheets are available in these thicknesses: 1.5 mm (SGmA-15), 1.8 mm (SGmA-18), 2.0 mm (SGmA-20), and 2.4 mm (SGmA-24).
- 1
- 2
- 3
- …
- 10
- Next Page »