This EPD is for baseTherm’s bound EPS ballasting floor insulation: baseTherm® Low Lambda baseTherm® 150 baseTherm® 200 baseTherm® 250 The bound EPS ballasting provides a firm insulating floor surface. It is manufactured in accordance with I.S.EN 16025-1:2013, “Thermal and/or sound insulating products in building construction. Bound EPS ballasting requirements for factory premixed EPS dry plaster”. […]
Breathable Monolithic Membranes | EXOPERM MONO 150, EXOPERM MONO SA 250
This EPD is for Partel’s EXOPERM MONO 150 breathable Monolithic membrane, and EXOPERM MONO SA 250 (self-adhesive) breathable Monolithic membrane. The raw materials are predominantly polyester elastomer bonded to a non-woven or scrim, with a small amount of ink printing on the surface, to ensure correct installation, and adhesive (in the case of the EXOPERM […]
Vapour Control Membranes | VARA PLUS, IZOPERM PLUS
This EPD is for Partel’s VARA PLUS Smart Vapour Control Layer and IZOPERM PLUS Vapour Control Membrane. The raw materials are predominantly polypropylene non-woven or scrim and one or more copolymers, with a small amount of ink printed on one side of the membrane to ensure correct installation. VARA PLUS is a smart high-performance vapour […]
Reflective Breathable Membrane | ECHOFOIL EXO
This EPD is for Partel’s ECHOFOIL EXO Reflective breathable membrane. The raw materials are mainly BOPP metalised film, PP granulate and a non-woven or scrim layer, with a small amount of ink printed on one side to ensure correct installation. ECHOFOIL EXO membrane has a very low emissivity of 0.05 which improves thermal comfort while […]
TCMC, TNB, X2TDC(R), TDC(R), TDC-HV2 & TDC-HV3 Rapid Set Emulsifiers
These products are a mix of fatty imidazoline derivates and amidoamines designed for fast-breaking emulsions with varying viscosity, and can be used with both naphthenic and paraffinic bitumen. They are produced and supplied, by Chemoran, in liquid form. They are usually supplied to customers in returnable/re-useable intermediate bulk containers (IBCs). The rapid set emulsifiers are […]
GAP, MDC, CPM-P, TT, TLC Mixing Grade Emulsifiers
These products are a mix of fatty imidazoline derivatives and amidoamines designed for bitumen emulsions used in the manufacture of mixing grade bitumen emulsions for cold mixes, grave emulsion and microsurfacing with either paraffinic or naphthenic bitumen. They are produced and supplied, by Chemoran, in liquid form. They are usually supplied to customers in returnable/re-useable […]
TPH and XTX(R) Adhesion Agents
These products are a mix of fatty imidazoline/amidoamine derivatives and polyethylene amines designed for use as adhesives agents in asphalt mixtures, to ensure a better bitumen/aggregate bond. They are produced and supplied, by Chemoran, in liquid form. They are usually supplied to customers in returnable/re-useable intermediate bulk containers (IBCs). The adhesion agents are manufactured by […]
CDML bitumen additive
CDML is a bitumen additive that is used to improve the cohesion build-up of cold micro-surfacing asphalt made with paraffinic bitumen. It can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing applications. It is produced and supplied, by Chemoran, in liquid […]
Breedon Cement: CEM II/A-L 42,5 N bulk cement
This is a Cradle to Gate EPD. The cement is manufactured at the Breedon Cement Ireland factory at Kinnegad, Co. Westmeath, Ireland, in accordance with I.S. EN 197-1:2011, Compositions, specifications and conformity criterial for common cements. The main material components of the cement are clinker, ground limestone and gypsum. A small amount of bypass dust […]
Breedon Cement: CEM II/A-L 42,5 N bagged cement
This is a Cradle to Gate EPD. The cement is manufactured at the Breedon Cement Ireland factory at Kinnegad, Co. Westmeath, Ireland, in accordance with I.S. EN 197-1:2011, Compositions, specifications and conformity criterial for common cements. The main material components of the cement are clinker, ground limestone and gypsum. A small amount of bypass dust […]
Breedon Cement: CEM I 52,5 N bulk cement
This is a Cradle to Gate EPD. The cement is manufactured at the Breedon Cement Ireland factory at Kinnegad, Co. Westmeath, Ireland, in accordance with I.S. EN 197-1:2011, Compositions, specifications and conformity criterial for common cements. The main material components of the cement are clinker, ground limestone and gypsum. A small amount of bypass dust […]
Breedon Cement: CEM I 42,5 R bulk cement
This is a Cradle to Gate EPD. The cement is manufactured at the Breedon Cement Ireland factory at Kinnegad, Co. Westmeath, Ireland, in accordance with I.S. EN 197-1:2011, Compositions, specifications and conformity criterial for common cements. The main material components of the cement are clinker, ground limestone and gypsum. A small amount of bypass dust […]
Unilin Insulation Boards: FR ALU, FR BGM, FR MG
This EPD is carried out for the Unilin products: FR ALU, FR BGM and FR MG of thicknesses 100mm each. The bulk raw materials polyol & MDI are mixed with various catalysts and additives. The insulation products are manufactured in accordance with I.S. EN 13165:2008, Thermal insulation products for buildings, factory made rigid polyisocyanurate foam […]
Unilin Insulation Boards: Cavity Therm, Xtroliner and Xtrowall Plus
This EPD is carried out for the Unilin products: Cavity Therm, Xtroliner and Xtrowall Plus of thicknesses 100mm, 100mm and 110mm each, respectively. The bulk raw materials polyol & MDI are mixed with various catalysts and additives. The insulation products are manufactured in accordance with I.S. EN 13165:2008, Thermal insulation products for buildings, factory made […]
Tobermore concrete products
This is a Cradle to Gate with options EPD for the following concrete products: Fusion 100x100x60mm Fusion 200x100x60mm Fusion 200x200x60mm Fusion 300x200x60mm Fusion 300x300x60mm Fusion 600x300x60mm Hydropave Fusion Duo 60mm Sienna 60mm Sienna Setts 60mm Sienna Duo 60mm
Tobermore concrete products
This is a Cradle to Gate with options EPD for the following concrete products: Fusion 80mm Hydropave Fusion 200x100x80mm Hydropave Fusion 300x200x80mm Hydropave Fusion 300x300x80mm Hydropave Fusion 600x300x80mm Manhattan 80mm
Tobermore concrete products
This is a Cradle to Gate with options EPD for the following concrete products: Sienna Setts 100x100x50mm Sienna 208x173x50mm Sienna Duo 50mm
Tobermore concrete products
This is a Cradle to Gate with options EPD for the following concrete products: Braemar 200x100x80mm Arran Stone Braemar 200x100x80mm Cara Slate Braemar 200x100x80mm Cara Slate GT Braemar 200x100x80mm Innis Black Braemar 200x100x80mm Innis Black GT Braemar 200x100x80mm Islay Rose GT Braemar 200x100x80mm Jura Grey Braemar 300x200x80mm Alto Silver GT Braemar 300x200x80mm Cara Slate GT […]
- « Previous Page
- 1
- …
- 5
- 6
- 7
- 8
- 9
- …
- 13
- Next Page »