This EPD covers 1 m2 of curtain wall type Concept Wall® CW 60 – Concept Wall® CW 60 HI. These EPD results have been calculated from a modelling software originally developed by thinkstep and successively updated by Ecoinnovazione s.r.l. via an i-report in GaBi 8.7. Among the product family, three representative products have been selected […]
Passive Sills – Window sills and moulded profile sections
This EPD is carried out for Passive Sills’ window sill and moulded profile sections.
Techrete Architectural precast concrete cladding
Techrete produce bespoke architectural precast concrete cladding. This EPD covers Techrete’s precast cladding products constructed of reinforced concrete. The concrete itself is produced from raw materials – white and grey cement, powder cement replacements, fine and coarse aggregate, admixtures and pigments where required. The reinforcement used in these products is produced from 100% recycled steel […]
Cemfloor by McGraths
This EPD is carried out for Cemfloor binder. The constituent raw materials comprise finely ground calcium carbonate and a proprietary binder, Cemexa. The two materials are blended to make the Cemfloor binder. The Cemfloor binder is manufactured in accordance with EN 12620:2013, Aggregates for concrete.
IMS Greenstone Recycled Aggregates
This EPD is carried out for the IMS Greenstone Recycled Aggregates, covering three aggregate types: Class 6F2, Clause 503 and Clause 803. The constituent raw materials comprise recycled concrete construction demolition waste. Aggregate is manufactured in accordance with I.S. EN 13242:2002 + A1, 2007, Aggregates for unbound and hydraulically bound materials for use in civil […]
Unilin Thin-R insulation boards
This EPD is carried out for the Unilin Thin-R products: – Thin-R 25mm thick board – Thin-R 50mm thick board – Thin-R 100mm thick board – Thin-R 150mm thick board The main raw materials of the insulation board are diisocyanate, polyol, blowing agent, flame retardant, facer material & catalysts. The Thin-R insulation products are manufactured […]
Ecocel Cellulose Fibre Insulation
This EPD is carried out for Ecocel Cellulose Insulation. The constituent raw materials comprise recycled paper and fire retardant admixtures. The insulation is manufactured in accordance with BS 5803-3:1985 Thermal insulation for use in pitched roof spaces in dwellings.
Kilsaran M4 Masonry Mortar
This EPD covers Kilsaran’s bulk mortar product, M4 Masonry Mortar. The constituent raw materials of the bulk dry mortar are: EN 197 cements, sands, and admixtures for thickening and hardening.
Kilsaran Paving Products
This EPD includes the following paving products: – Newgrange Paving Block 80mm Silver Granite – Clima Pave 60mm Curragh Gold – Corrib Paving Block 60mm Black Granite The constituent raw materials of the paving products are EN 197 cements, gravel, sands, water, pigments and admixtures for mixing and efflorescence prevention.
Cedral Fibre Cement Slates
This EPD is carried out for the Cedral fibre cement slate. The constituent raw materials of the slate comprise: cement, GGBS, limestone, admixtures, synthetic fibres, pigments, paint and water. Cedral fibre cement slates are manufactured in accordance with IS EN 492:2012+A2:2018, ‘Fibre-cement slates and fittings. Product specification and test methods.
Mannok Hollowcore Slabs
This EPD presents the results relating to a 1m length of 1.2m wide section of Mannok Hollowcore Slabs prestressed flooring. The products are made in thicknesses varying from 150mm deep to 400mm deep, designated as follows: – Hollowcore 150 – Hollowcore 150HD – Hollowcore 200 – Hollowcore 250 – Hollowcore 320 – Hollowcore 400
Sopro SG 602 – Primer sealer
Dispersion-based products comprise organic binding agents based on synthetic and/or natural resins, mineral fillers such as chalk as well as water and smaller volumes of auxiliaries (thickening agents, defoaming agents, surface-active agents, preservatives etc.). They dry physically through evaporation of the water contained therein. They comply with manifold, often specific, tasks in the construction, furnishing […]
Sopro RS 648 – Vibration Bonding Slurry
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro VBK 691 – LVT Vinyl Flooring Adhesive
Solvent-free, dispersion-based products comprise organic binding agents based on synthetic and/or natural resins, mineral fillers such as chalk as well as water and smaller volumes of auxiliaries (thickening agents, defoaming agents, surface-active agents, preservatives etc.). They dry physically through evaporation of the water contained therein. They comply with manifold, often specific, tasks in the construction, […]
SMARTPLY Oriented Strand Boards (OSB)
This EPD presents the results for SMARTPLY’s OSB panel products. The full list of OSB panel products comprises: SMARTPLY MAX FR B (OSB/3) SMARTPLY MAX (OSB/3) SMARTPLY MAX T&G (OSB/3) SMARTPLY ULTIMA (OSB/4) SMARTPLY PATTRESS PLUS SMARTPLY AIRTIGHT SMARTPLY SITEPROTECT SMARTPLY WEBSTOCK All these panel products are all produced in the same way, with very […]
Sopro FS 15 plus 550 – Floor-levelling compound
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro No. 1 – TW 401 Flexible Tile Adhesive
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro FKM XL 444 – Multi Purpose eXtralight Flexible Adhesive
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).