CASEA Bauprotec 900 E is a factory produced Lightweight Lime Cement Render specially designed for hand and machine application produced to EN 998-1: 2016. The unique properties of this render makes it suitable for application on low, medium and high density substrates.
CASEA Bauprotec FLP Plus Ultra Lightweight Fibre Render
CASEA Bauprotec FLP Plus is a factory produced highly efficient lightweight mineral lime cement render produced to EN 998-1:2016, specially designed for high insulating masonry for interior and exterior use with excellent working properties.
CASEA Bauprotec 700 Tanking and Plinth Render
CASEA Bauprotec 700 is a factory produced sand & cement render specially designed for hand and machine application produced to EN 998-1: 2016. The unique tanking properties of this render make it suitable for application on basement walls and plinths.
CASEA Bauprotec 800 General Purpose Render
CASEA Bauprotec 800 is a factory produced general purpose render specially designed for hand and machine application produced to EN 998-1: 2016. The unique properties of this render make it suitable for application on medium and high density substrates.
CASEA Bauprotec RHS Multi Purpose Render
Bauprotec RHS is a factory produced highly polymer modified render specially designed for hand and machine application produced to EN 998-1: 2016. The unique properties of this render makes it suitable for multi purposes such as adhesive bridge/key coat on difficult substrates, adhesive and fibreglass reinforcement base coat on insulation and cement particle boards.
CASEA Bauprocalc 830 Hydraulic Lime Based Render
CASEA Bauprocalc KAP 830 is a factory produced hydraulic hardening render/plaster based on lime, specially designed for hand and machine application produced to DIN EN 998-1: 2016. The unique properties of this render makes it suitable for application on low, medium and high density substrates, for renovation of old and listed building and ecological new […]
CASEA Bauprocalc KG FP Hydraulic Lime Based Skim Coat
CASEA Bauprocalc KG FP is a factory produced hydraulic hardening skim coat plaster based on lime, specially designed for hand and machine application produced to DIN EN 998-1: 2016. The unique properties of this render make it suitable for application on low, medium and high density substrates, for renovation of old and listed building and […]
CASEA KlimaFeinPutz KFP Breathable Fine Finishing Plaster
CASEA Klimafeinputz KFP is a special white, mineral fine plaster CS I – according to EN 998-1, suitable for indoor use. KFP can be applied onto all common base coats such as; lime-cement, cement, gypsum, gypsum-lime, gypsum-lime-clay and clay plastering renders, as well as onto plaster boards. The product’s special composition, consisting of clay, fine […]
CASEA Mineral Finish Coat
Mineral Finish Coat – K is a factory produced mineral-based, high quality finish coat render, specially designed for hand and machine application to EN 998-1: 2016. Grain sizes available are 1.5, 2 and 3mm in order to achieve a fine, medium or course (rough cast) texture.
CASEA Bauprotec 850M Lightweight Lime Cement Render
CASEA Bauprotec 850 M is a factory produced Lightweight Lime Cement Render specially designed for machine or hand application produced to EN 998-1: 2016. The unique properties of this render makes it suitable for application on low, medium and high density substrates.
Kilsaran M4 Masonry Mortar
This EPD covers Kilsaran’s bulk mortar product, M4 Masonry Mortar. The constituent raw materials of the bulk dry mortar are: EN 197 cements, sands, and admixtures for thickening and hardening.
Kilsaran Paving Products
This EPD includes the following paving products: – Newgrange Paving Block 80mm Silver Granite – Clima Pave 60mm Curragh Gold – Corrib Paving Block 60mm Black Granite The constituent raw materials of the paving products are EN 197 cements, gravel, sands, water, pigments and admixtures for mixing and efflorescence prevention.
Cedral Fibre Cement Slates
This EPD is carried out for the Cedral fibre cement slate. The constituent raw materials of the slate comprise: cement, GGBS, limestone, admixtures, synthetic fibres, pigments, paint and water. Cedral fibre cement slates are manufactured in accordance with IS EN 492:2012+A2:2018, ‘Fibre-cement slates and fittings. Product specification and test methods.
Mannok Hollowcore Slabs
This EPD presents the results relating to a 1m length of 1.2m wide section of Mannok Hollowcore Slabs prestressed flooring. The products are made in thicknesses varying from 150mm deep to 400mm deep, designated as follows: – Hollowcore 150 – Hollowcore 150HD – Hollowcore 200 – Hollowcore 250 – Hollowcore 320 – Hollowcore 400
Sopro SG 602 – Primer sealer
Dispersion-based products comprise organic binding agents based on synthetic and/or natural resins, mineral fillers such as chalk as well as water and smaller volumes of auxiliaries (thickening agents, defoaming agents, surface-active agents, preservatives etc.). They dry physically through evaporation of the water contained therein. They comply with manifold, often specific, tasks in the construction, furnishing […]
Sopro RS 648 – Vibration Bonding Slurry
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro VBK 691 – LVT Vinyl Flooring Adhesive
Solvent-free, dispersion-based products comprise organic binding agents based on synthetic and/or natural resins, mineral fillers such as chalk as well as water and smaller volumes of auxiliaries (thickening agents, defoaming agents, surface-active agents, preservatives etc.). They dry physically through evaporation of the water contained therein. They comply with manifold, often specific, tasks in the construction, […]
CASEA Casuplast 1000 – One Coat Gypsum Projection Plaster
Gypsum binder in accordance with /DIN EN 13279-1/ is the base product for industrial manufacturing of various gypsum plasters but also for all prefabricated elements made of gypsum. It is extracted through calcination of calcium sulphate dihydrate (CaSO4 2 H2O) and comprises calcium sulphate in its various hydrate phases, e.g. hemi-hydrate (CaSO4 ½ H2O) and […]