Gyproc WallBoard consists of an aerated gypsum core encased in, and firmly bonded to, strong paper liners. The gypsum core contains various additives. Gyproc WallBoard is a WallBoard product and comes with the option of either tapered edge or square edge on the long edges and has short edges sawn straight. Gyproc WallBoard is a […]
Gyproc Finish Plaster (Skimcoat, Skimcoat Short Set, Carlite and Carlite Ultra products)
Gyproc Finish Plaster is a retarded hemihydrate, premixed gypsum plaster, requiring only the addition of clean water to prepare it for use. Gyproc Finish Plaster has a controlled, graduated set and produces surfaces that are free from shrinkage cracks. Gyproc Finish Plaster provides a smooth, flat, high quality surface to internal walls and ceilings, and […]
12.5mm Gyproc Fireline Board
Gyproc FireLine consists of an aerated gypsum core with glass fibre and other additives encased in, and firmly bonded to, strong paper liners. The gypsum core contains various additives. Gyproc FireLine comes with the option of either tapered edge or square edge on the long edges and has short edges sawn straight. Gyproc FireLine is […]
12.5mm Gyproc WallBoard
Gyproc WallBoard consists of an aerated gypsum core encased in, and firmly bonded to, strong paper liners. The gypsum core contains various additives. Gyproc WallBoard is a WallBoard product and comes with the option of either tapered edge or square edge on the long edges and has short edges sawn straight. Gyproc WallBoard is a […]
Gyproc Finish Plaster (Skimcoat, Skimcoat Short Set, Carlite and Carlite Ultra products)
Gyproc Finish Plaster is a retarded hemihydrate, premixed gypsum plaster, requiring only the addition of clean water to prepare it for use. Gyproc Finish Plaster has a controlled, graduated set and produces surfaces that are free from shrinkage cracks. Gyproc Finish Plaster provides a smooth, flat, high quality surface to internal walls and ceilings, and […]
ISOVER Comfort 35 140mm Roll
This Environmental Product Declaration (EPD) describes the environmental impacts of 1 m² of mineral wool with a thermal resistance of 4.00 K*m²*W The intended use of this EPD is to communicate scientifically based environmental information for construction products, for the purpose of assessing the environmental performance of buildings. The production site of Saint-Gobain Isover Etten-leur […]
SlimPatio 68 Sliding Door
This EPD covers two-vent SlimPatio SP 68 sliding aluminium doors. These EPD results have been calculated from a modelling tool developed by thinkstep via an i-report in GaBi 6. Among the SlimPatio SP 68 sliding doors, two representative products have been selected and corresponding EPD results have been calculated based on specific bill of materials. […]
CP 155/ CP 155- LS Sliding Door
This EPD covers two-vent Cp 155/CP 155-LS sliding aluminium doors. These EPD results have been calculated from a modelling software originally developed by thinkstep and successively updated by Ecoinnovazione s.r.l. via an i-report in GaBi 8.7. Among the product family, two representative products have been selected and corresponding EPD results have been calculated based on […]
CW 60 Curtain Wall
This EPD covers 1 m2 of curtain wall type Concept Wall® CW 60 – Concept Wall® CW 60 HI. These EPD results have been calculated from a modelling software originally developed by thinkstep and successively updated by Ecoinnovazione s.r.l. via an i-report in GaBi 8.7. Among the product family, three representative products have been selected […]
Passive Sills – Window sills and moulded profile sections
This EPD is carried out for Passive Sills’ window sill and moulded profile sections.
Techrete Architectural precast concrete cladding
Techrete produce bespoke architectural precast concrete cladding. This EPD covers Techrete’s precast cladding products constructed of reinforced concrete. The concrete itself is produced from raw materials – white and grey cement, powder cement replacements, fine and coarse aggregate, admixtures and pigments where required. The reinforcement used in these products is produced from 100% recycled steel […]
Cemfloor by McGraths
This EPD is carried out for Cemfloor binder. The constituent raw materials comprise finely ground calcium carbonate and a proprietary binder, Cemexa. The two materials are blended to make the Cemfloor binder. The Cemfloor binder is manufactured in accordance with EN 12620:2013, Aggregates for concrete.
STEICO FLEX
Wood Fibre Insulation for walls and lofts.
CASEA Flowing Floor Screed | Calcium Sulphate Based
This Declaration describes calcium sulphate flowing screeds and conventional calcium sulphate screeds based on standard recipes and standard manufacturing processes. The declared unit is 1 kg of the dry mixture prior to adding water on the construction site. This dry mixture has a dry density > 1500 kg/m³. The primary binding agent is represented by […]
IMS Greenstone Recycled Aggregates
This EPD is carried out for the IMS Greenstone Recycled Aggregates, covering three aggregate types: Class 6F2, Clause 503 and Clause 803. The constituent raw materials comprise recycled concrete construction demolition waste. Aggregate is manufactured in accordance with I.S. EN 13242:2002 + A1, 2007, Aggregates for unbound and hydraulically bound materials for use in civil […]
Unilin Thin-R insulation boards
This EPD is carried out for the Unilin Thin-R products: – Thin-R 25mm thick board – Thin-R 50mm thick board – Thin-R 100mm thick board – Thin-R 150mm thick board The main raw materials of the insulation board are diisocyanate, polyol, blowing agent, flame retardant, facer material & catalysts. The Thin-R insulation products are manufactured […]
Ecocel Cellulose Fibre Insulation
This EPD is carried out for Ecocel Cellulose Insulation. The constituent raw materials comprise recycled paper and fire retardant admixtures. The insulation is manufactured in accordance with BS 5803-3:1985 Thermal insulation for use in pitched roof spaces in dwellings.
CASEA Bauprotec SLP Lightweight Plinth and Tanking Render
CASEA Bauprotec SLP is a factory produced Lightweight Sand & Cement Render specially designed for hand and machine application produced to EN 998-1:2016. The unique tanking properties of this render makes it suitable for application on basement walls and plinths.
- « Previous Page
- 1
- …
- 12
- 13
- 14
- 15
- 16
- 17
- Next Page »