Glasroc F is predominately used as part of the FireCase frameless structural steel encasement system, giving up to 120 minutes fire protection and also used in the GypLyner ENCASE system, achieving up to 180 minutes fire protection. Non-combustible Glasroc F boards, developed using paper-free glass fibre technology, provide the basis for a range of steel […]
Unilin PIR Insulation Boards
This EPD is for Unilin (Polyisocyanurate) PIR insulation boards: CT/PIR, FR/ALU, FR/BGM, FR/MG, Thin-R, of thickness 100 mm, the R values quoted are minimum values and the EPD is calculated on this basis. The PIR boards typically comprise of primary raw materials MDI, polyol, flame retardant, pentane, with the addition of minor amounts of admixtures. […]
CWM and CWM-BG1 bitumen additives for warm-mix asphalt
CWM and CWM-BG1 are surface-active agents used as bitumen additives in the manufacture of warm-mix asphalt, in the road construction industry. The addition of these additives enables asphalt producers to lower their mixing temperature by the order of 35°C, compared to the temperatures normally used to make the more conventional “hot-mix” asphalt. Both CWM and […]
Ecotherm® double and triple glazed windows
This EPD is carried out for the Munster Joinery Ecotherm double and triple glazed windows. The raw materials for the Ecotherm windows comprise: glass, argon, uPVC and aluminium profiles, warm edge spacer, foam filler and associated hardware (hinges, handles, recievers and gears). The windows are manufactured in accordance with I.S. EN 14351-1:2006 +A1:2010 Windows and […]
Passiv uPVC double and triple glazed windows
This EPD is carried out for the Munster Joinery Passiv uPVC double and triple glazed windows. The raw materials for the Passiv uPVC windows comprise: glass, argon, uPVC profiles, warm edge spacer, foam filler and associated hardware (hinges, handles, recievers and gears). The windows are manufactured in accordance with I.S. EN 14351-1:2006 +A1:2010 Windows and […]
HP uPVC double and triple glazed windows
This EPD is carried out for the Munster Joinery HP uPVC double and triple glazed windows. The raw materials for the HP uPVC windows comprise: glass, argon, uPVC profiles, warm edge spacer and associated hardware (hinges, handles, recievers and gears). The windows are manufactured in accordance with I.S. EN 14351-1:2006 +A1:2010 Windows and doors – […]
Hardwood and Softwood double and triple glazed windows
This EPD is carried out for the Munster Joinery Hardwood and Softwood double and triple glazed windows. The raw materials for the Hardwood and Softwood windows comprise: glass, argon, hardwood/softwood profiles, warm edge spacer and associated hardware (hinges, handles, recievers and gears). The windows are manufactured in accordance with I.S. EN 14351-1:2006 +A1:2010 Windows and […]
Passiv AluClad and Passiv AluP double and triple glazed windows
This EPD is carried out for the Munster Joinery Passiv AluClad and Passiv AluP double and triple glazed windows. The raw materials for the Passiv AluClad and Passiv AluP windows comprise: glass, argon, uPVC and aluminium and softwood profiles, warm edge spacer, foam filler and associated hardware (hinges, handles, recievers and gears). The windows are […]
Kingscourt Brick: Clay brick & Sand-faced clay brick
This EPD is carried out for the Kingscourt brick products: (i) clay bricks, and (ii) sand-faced clay bricks. The bricks are manufactured in accordance with the requirements of I.S. EN 771–1: Specification for masonry units: Clay masonry units. The bricks are primarily used as a facing brick for external walls in standard domestic and commercial […]
Cold-rolled steel profiles for framing and partition systems
This EPD is carried out for the steel profile sections manufactured by Steel Formed Sections Ltd. The raw material is hot dipped sheet rolled galvanised steel, grade DX51D+Z steel for forming. The steel profile sections are manufactured in accordance with EN 14195:2014 Metal framing components for gypsum board systems. Definitions, requirements and test methods
Sopro’s No.1 silver 403 flexible tile adhesive
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro VS 582 Self Levelling Compound Lays to Falls
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro TitecFuge® plus 1-10 mm Grout
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro FugenEpoxi plus
Reactive resins based on epoxy resin, filled and/or aqueous filled. The reactive resins are manufactured in a two component process using reactively-diluted epoxy resins and polyamines. The aqueous systems can be formulated as aqueous dispersions on the resin or hardening agent side. They comply with multiple, often specific tasks in the construction, fitting and repair […]
Sopro Flexible Sealing Slurry RS 623
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Kraft paper faced PIR insulation bonded to plasterboards
This LCA is carried out for the Ballytherm PIR insulation panels comprising Kraft paper-faced panels 25mm, 38mm and 50mm thick bonded to 12.5mm plasterboard. The main raw materials of the insulation boards are MDI, polyol, flame retardant, pentane blowing agent, plasterboard, paper sheet facings, and minor amounts of catalysts. These Ballytherm insulation products are used […]
Foil faced PIR insulation boards
This EPD is carried out for the Ballytherm PIR insulation panels comprising foil-faced panels 25mm, 50mm, 100mm and 150mm thick. The main raw materials of the insulation boards are MDI, polyol, flame retardant, pentane blowing agent, foil sheet facings, and minor amounts of catalysts. These Ballytherm insulation products are used in floors, cavity walls, steel […]
Unilin EPS Range
This EPD is carried out for the Unilin Hytherm SD, Hytherm HD and Warm-R Premium products. The raw material for the Hytherm boards is white expandable polystyrene (EPS) beads; the raw material for the Warm-R Premium boards is grey expandable polystyrene (EPS) beads. The insulation products are manufactured in accordance with I.S. EN 13163, “Thermal […]
- « Previous Page
- 1
- …
- 10
- 11
- 12
- 13
- 14
- …
- 17
- Next Page »