CASEA Klimafeinputz KFP is a special white, mineral fine plaster CS I – according to EN 998-1, suitable for indoor use. KFP can be applied onto all common base coats such as; lime-cement, cement, gypsum, gypsum-lime, gypsum-lime-clay and clay plastering renders, as well as onto plaster boards. The product’s special composition, consisting of clay, fine […]
CASEA Mineral Finish Coat
Mineral Finish Coat – K is a factory produced mineral-based, high quality finish coat render, specially designed for hand and machine application to EN 998-1: 2016. Grain sizes available are 1.5, 2 and 3mm in order to achieve a fine, medium or course (rough cast) texture.
CASEA Bauprotec 850M Lightweight Lime Cement Render
CASEA Bauprotec 850 M is a factory produced Lightweight Lime Cement Render specially designed for machine or hand application produced to EN 998-1: 2016. The unique properties of this render makes it suitable for application on low, medium and high density substrates.
Sopro SG 602 – Primer sealer
Dispersion-based products comprise organic binding agents based on synthetic and/or natural resins, mineral fillers such as chalk as well as water and smaller volumes of auxiliaries (thickening agents, defoaming agents, surface-active agents, preservatives etc.). They dry physically through evaporation of the water contained therein. They comply with manifold, often specific, tasks in the construction, furnishing […]
Sopro RS 648 – Vibration Bonding Slurry
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro VBK 691 – LVT Vinyl Flooring Adhesive
Solvent-free, dispersion-based products comprise organic binding agents based on synthetic and/or natural resins, mineral fillers such as chalk as well as water and smaller volumes of auxiliaries (thickening agents, defoaming agents, surface-active agents, preservatives etc.). They dry physically through evaporation of the water contained therein. They comply with manifold, often specific, tasks in the construction, […]
CASEA Casuplast 1000 – One Coat Gypsum Projection Plaster
Gypsum binder in accordance with /DIN EN 13279-1/ is the base product for industrial manufacturing of various gypsum plasters but also for all prefabricated elements made of gypsum. It is extracted through calcination of calcium sulphate dihydrate (CaSO4 2 H2O) and comprises calcium sulphate in its various hydrate phases, e.g. hemi-hydrate (CaSO4 ½ H2O) and […]
CASEA Casuplast 1200 – Light Weight One Coat Projection Plaster
Gypsum binder in accordance with /DIN EN 13279-1/ is the base product for industrial manufacturing of various gypsum plasters but also for all prefabricated elements made of gypsum. It is extracted through calcination of calcium sulphate dihydrate (CaSO4 2 H2O) and comprises calcium sulphate in its various hydrate phases, e.g. hemi-hydrate (CaSO4 ½ H2O) and […]
CASEA Casuplast 1300 – Ultra Light Weight Projection Plaster
Gypsum binder in accordance with /DIN EN 13279-1/ is the base product for industrial manufacturing of various gypsum plasters but also for all prefabricated elements made of gypsum. It is extracted through calcination of calcium sulphate dihydrate (CaSO4 2 H2O) and comprises calcium sulphate in its various hydrate phases, e.g. hemi-hydrate (CaSO4 ½ H2O) and […]
CASEA Casuhaft Rot – Gypsum Skim Finish
Gypsum binder in accordance with /DIN EN 13279-1/ is the base product for industrial manufacturing of various gypsum plasters but also for all prefabricated elements made of gypsum. It is extracted through calcination of calcium sulphate dihydrate (CaSO4 2 H2O) and comprises calcium sulphate in its various hydrate phases, e.g. hemi-hydrate (CaSO4 ½ H2O) and […]
Sopro FS 15 plus 550 – Floor-levelling compound
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro No. 1 – TW 401 Flexible Tile Adhesive
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro FKM XL 444 – Multi Purpose eXtralight Flexible Adhesive
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro FKM 600 – Silver Multi Purpose Flexible Tile Adhesive
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro SC 606 – Flexible Tile Adhesive
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro FF 450 – Flexible Tile Adhesive
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro RAM 3 – Renovation and Levelling Mortar
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).
Sopro OFS 543 – Contract Floor Levelling Compound
Modified mineral mortars are combinations of one or more inorganic binder, aggregates, water and if necessary additives. They comply with manifold, often specific, tasks in the construction, furnishing and refurbishment of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst case-approach).