Login
  • Home
  • What is an EPD?
  • Develop an EPD
  • EPD Ireland Programme
  • EPD Campaign
  • EPD Search
  • EPD Upload
  • Programme fees
    • Enterprise Ireland & IDA Grants
  • Updates
You are here: Home / Archives for IBU - Germany

Sopro FugenEpoxi plus

17th December 2021 by SMETBP

Reactive resins based on epoxy resin, filled and/or aqueous filled. The reactive resins are manufactured in a two component process using reactively-diluted epoxy resins and polyamines. The aqueous systems can be formulated as aqueous dispersions on the resin or hardening agent side. They comply with multiple, often specific tasks in the construction, fitting and repair […]

Sopro FDF 527 Tanking Membrane

18th June 2021 by SMETBP

Dispersion-based products comprise organic binding agents based on synthetic and/or natural resins, mineral fillers such as chalk as well as water and smaller volumes of auxiliaries (thickening agents, defoaming agents, surface-active agents, preservatives etc.). The product displaying the highest environmental impacts within the class of dispersion-based products considered was used as a representative product for […]

Sarnafil TG 66

7th April 2021 by Marinela Hristova

Sarnafil® TG 66 polymeric waterproofing membrane is made of flexible polyolefin (FPO) and is treated with stabilizers against UV radiation. An inlay of glass nonwoven is encapsulated within the sheet. Sarnafil® TG 66 polymeric waterproofing membrane is available in the following thicknesses: 1.5 mm (TG 66-15), 1.8 mm (TG 66-18) and 2.0 mm (TG 66-20).

Sarnafil® TS 77

30th March 2021 by Marinela Hristova

Sarnafil® TS 77 polymeric waterproofing membrane is made of flexible polyolefin (FPO) and is treated with flame retardant and stabilizers against UV radiation. An inlay of glass non-woven and polyester reinforcement is encapsulated within the sheet. Sarnafil® TS 77 polymeric waterproofing membrane is available in the following thicknesses: 1.5 mm (TS 77-15), 1.8 mm (TS […]

STEICO FLEX

24th September 2020 by admin

Wood Fibre Insulation for walls and lofts.

CASEA Flowing Floor Screed | Calcium Sulphate Based

15th September 2020 by SMETBP

Factory produced Calcium Sulphate based flowing floor screeds for construction of bonded, un-bonded and floating floor screed constructions. The floor screed material is delivered to site factory produced by mobile screed factory or mixer truck or is supplied to site as a dry mortar in bags or site silos.

Phonotherm® BOSIG Baukunststoffe GmbH

15th September 2020 by Niall Crossan

Phonotherm® construction boards are made of high quality CFC-, HCFC- and Formaldehyde-free Polyurethane rigid foam (PU) residues. The material characteristics include water resistance, water permeability; insensitivity towards moisture and therefore prevention of putrefaction; isolation and insulation. Phonotherm® has a high stability despite low deadweight. The boards are produced in different dimensions and thicknesses.

CASEA Bauprotec SLP Lightweight Plinth and Tanking Render

14th April 2020 by SMETBP

CASEA Bauprotec SLP is a factory produced Lightweight Sand & Cement Render specially designed for hand and machine application produced to EN 998-1:2016. The unique tanking properties of this render makes it suitable for application on basement walls and plinths.

CASEA Bauprotec 900E Lightweight Lime Cement Render

14th April 2020 by SMETBP

CASEA Bauprotec 900 E is a factory produced Lightweight Lime Cement Render specially designed for hand and machine application produced to EN 998-1: 2016. The unique properties of this render makes it suitable for application on low, medium and high density substrates.

CASEA Bauprotec FLP Plus Ultra Lightweight Fibre Render

14th April 2020 by SMETBP

CASEA Bauprotec FLP Plus is a factory produced highly efficient lightweight mineral lime cement render produced to EN 998-1:2016, specially designed for high insulating masonry for interior and exterior use with excellent working properties.

CASEA Bauprotec 700 Tanking and Plinth Render

14th April 2020 by SMETBP

CASEA Bauprotec 700 is a factory produced sand & cement render specially designed for hand and machine application produced to EN 998-1: 2016. The unique tanking properties of this render make it suitable for application on basement walls and plinths.

CASEA Bauprotec 800 General Purpose Render

14th April 2020 by SMETBP

CASEA Bauprotec 800 is a factory produced general purpose render specially designed for hand and machine application produced to EN 998-1: 2016. The unique properties of this render make it suitable for application on medium and high density substrates.

CASEA Bauprotec RHS Multi Purpose Render

14th April 2020 by SMETBP

Bauprotec RHS is a factory produced highly polymer modified render specially designed for hand and machine application produced to EN 998-1: 2016. The unique properties of this render makes it suitable for multi purposes such as adhesive bridge/key coat on difficult substrates, adhesive and fibreglass reinforcement base coat on insulation and cement particle boards.

CASEA Bauprocalc 830 Hydraulic Lime Based Render

14th April 2020 by SMETBP

CASEA Bauprocalc KAP 830 is a factory produced hydraulic hardening render/plaster based on lime, specially designed for hand and machine application produced to DIN EN 998-1: 2016. The unique properties of this render makes it suitable for application on low, medium and high density substrates, for renovation of old and listed building and ecological new […]

CASEA Bauprocalc KG FP Hydraulic Lime Based Skim Coat

14th April 2020 by SMETBP

CASEA Bauprocalc KG FP is a factory produced hydraulic hardening skim coat plaster based on lime, specially designed for hand and machine application produced to DIN EN 998-1: 2016. The unique properties of this render make it suitable for application on low, medium and high density substrates, for renovation of old and listed building and […]

CASEA KlimaFeinPutz KFP Breathable Fine Finishing Plaster

14th April 2020 by SMETBP

CASEA Klimafeinputz KFP is a special white, mineral fine plaster CS I – according to EN 998-1, suitable for indoor use. KFP can be applied onto all common base coats such as; lime-cement, cement, gypsum, gypsum-lime, gypsum-lime-clay and clay plastering renders, as well as onto plaster boards. The product’s special composition, consisting of clay, fine […]

CASEA Mineral Finish Coat

14th April 2020 by SMETBP

Mineral Finish Coat – K is a factory produced mineral-based, high quality finish coat render, specially designed for hand and machine application to EN 998-1: 2016. Grain sizes available are 1.5, 2 and 3mm in order to achieve a fine, medium or course (rough cast) texture.

CASEA Bauprotec 850M Lightweight Lime Cement Render

9th April 2020 by SMETBP

CASEA Bauprotec 850 M is a factory produced Lightweight Lime Cement Render specially designed for machine or hand application produced to EN 998-1: 2016. The unique properties of this render makes it suitable for application on low, medium and high density substrates.

  • 1
  • 2
  • Next Page »

become a
member

or find out more

IGBC on Twitter

  • IrishGBC Completed in 2017 in Eindhoven, this pavilion is a design statement of the new #circulareconomy, a 100% circular bu… t.co/jBTbeE9LJn Time ago 23 Hours via Hootsuite Inc. Reply - Retweet - Favorite
  • @UKGBC released a new report exploring how the #circulareconomy can play a central role in delivering #netzero buil… t.co/WO5djM7oU0 Time ago 2 Days via Twitter Web App Reply - Retweet - Favorite
  • RT @PMVTrust: ✍️ Our Director of Housing Development & Communications, Francis Doherty, wrote about dereliction and the opportunity it pres… Time ago 3 Days via Twitter for iPhone Reply - Retweet - Favorite

Follow @IrishGBC on twitter.

Search on the wesbite

CARBON DESIGNER FOR IRELAND

CARBON DESIGNER FOR IRELAND

A free early-stage whole life cycle carbon assessment tool for Ireland.

Home Performance Index

Home Performance Index

Best quality, national and international standards, healthy, low carbon homes. From design to build, the Home Performance Index represents a first in Irish residential development certification.


become a
member

or find out more

EPD Ireland was developed by

Leadership for a Sustainable Built Environment
01 6815862
epd@igbc.ie
@IrishGBC

Home
What is an EPD?
Search the register
Publish an EPD

Supported By:

Manage Your EPD

We use cookies to ensure that we give you the best experience on our website. ACCEPT Cookie settings
Privacy & Cookies Policy

Privacy Overview

This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary
Always Enabled
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Non-necessary
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
SAVE & ACCEPT

User Login

Not registered? Lost your password?

User LostPassword

Please enter your username or email address. You will receive a link to create a new password via email.

Log in