This EPD is for baseTherm’s bound EPS ballasting floor insulation: baseTherm® Low Lambda baseTherm® 150 baseTherm® 200 baseTherm® 250 The bound EPS ballasting provides a firm insulating floor surface. It is manufactured in accordance with I.S.EN 16025-1:2013, “Thermal and/or sound insulating products in building construction. Bound EPS ballasting requirements for factory premixed EPS dry plaster”. […]
Unilin Insulation Boards: FR ALU, FR BGM, FR MG
This EPD is carried out for the Unilin products: FR ALU, FR BGM and FR MG of thicknesses 100mm each. The bulk raw materials polyol & MDI are mixed with various catalysts and additives. The insulation products are manufactured in accordance with I.S. EN 13165:2008, Thermal insulation products for buildings, factory made rigid polyisocyanurate foam […]
Unilin Insulation Boards: Cavity Therm, Xtroliner and Xtrowall Plus
This EPD is carried out for the Unilin products: Cavity Therm, Xtroliner and Xtrowall Plus of thicknesses 100mm, 100mm and 110mm each, respectively. The bulk raw materials polyol & MDI are mixed with various catalysts and additives. The insulation products are manufactured in accordance with I.S. EN 13165:2008, Thermal insulation products for buildings, factory made […]
Unilin PIR Insulation Boards
This EPD is for Unilin (Polyisocyanurate) PIR insulation boards: CT/PIR, FR/ALU, FR/BGM, FR/MG, Thin-R, of thickness 100 mm, the R values quoted are minimum values and the EPD is calculated on this basis. The PIR boards typically comprise of primary raw materials MDI, polyol, flame retardant, pentane, with the addition of minor amounts of admixtures. […]
Kraft paper faced PIR insulation bonded to plasterboards
This LCA is carried out for the Ballytherm PIR insulation panels comprising Kraft paper-faced panels 25mm, 38mm and 50mm thick bonded to 12.5mm plasterboard. The main raw materials of the insulation boards are MDI, polyol, flame retardant, pentane blowing agent, plasterboard, paper sheet facings, and minor amounts of catalysts. These Ballytherm insulation products are used […]
Foil faced PIR insulation boards
This EPD is carried out for the Ballytherm PIR insulation panels comprising foil-faced panels 25mm, 50mm, 100mm and 150mm thick. The main raw materials of the insulation boards are MDI, polyol, flame retardant, pentane blowing agent, foil sheet facings, and minor amounts of catalysts. These Ballytherm insulation products are used in floors, cavity walls, steel […]
Unilin EPS Range
This EPD is carried out for the Unilin Hytherm SD, Hytherm HD and Warm-R Premium products. The raw material for the Hytherm boards is white expandable polystyrene (EPS) beads; the raw material for the Warm-R Premium boards is grey expandable polystyrene (EPS) beads. The insulation products are manufactured in accordance with I.S. EN 13163, “Thermal […]
Unilin Chesterfield Safe-R
This EPD is carried out for the Unilin phenolic insulation board Safe-R of thickness 100mm. The raw resin material is mixed with various catalysts & additives including the blowing agent and placed between two layers of facing elements. The insulation products are manufactured in accordance with I.S. EN 13166:2012+A2:2016. Thermal insulation products for buildings. Factory […]
ISOVER Comfort 35 140mm Roll
This Environmental Product Declaration (EPD) describes the environmental impacts of 1 m² of mineral wool with a thermal resistance of 4.00 K*m²*W The intended use of this EPD is to communicate scientifically based environmental information for construction products, for the purpose of assessing the environmental performance of buildings. The production site of Saint-Gobain Isover Etten-leur […]
Passive Sills – Window sills and moulded profile sections
This EPD is carried out for Passive Sills’ window sill and moulded profile sections.
STEICO FLEX
Wood Fibre Insulation for walls and lofts.
Unilin Thin-R insulation boards
This EPD is carried out for the Unilin Thin-R products: – Thin-R 25mm thick board – Thin-R 50mm thick board – Thin-R 100mm thick board – Thin-R 150mm thick board The main raw materials of the insulation board are diisocyanate, polyol, blowing agent, flame retardant, facer material & catalysts. The Thin-R insulation products are manufactured […]
Ecocel Cellulose Fibre Insulation
This EPD is carried out for Ecocel Cellulose Insulation. The constituent raw materials comprise recycled paper and fire retardant admixtures. The insulation is manufactured in accordance with BS 5803-3:1985 Thermal insulation for use in pitched roof spaces in dwellings.
Mannok EPS
This EPD is carried out for Mannok EPS (6 different products; EPS 70, EPS 100, EPS 150, EPS 200, EPS Pearl 70, EPS Pearl 100. The process description is the same for all varieties. The number indicates the compressive strength of the material in KPa.
Mannok Insulation
This EPD is carried out for Mannok Insulation, 7 product varieties: Mannok Therm Floor / MF, Mannok Therm Roof / MR, Mannok Therm Wall / MW, Mannok Therm Cavity / MC, Mannok IsoShield, Mannok Therm Laminate-Kraft / MLK, Mannok Therm Roof / MFR-DPFR, Mannok Therm Roof / MFR-DPFR, Mannok Therm Roof / MFR-FFR. Mannok Insulation […]
Kore Insulation
This EPD covers 7 EPS insulation products. The constituent raw materials of these insulation products are expandable polystyrene beads. The raw materials for all the insulation products are the same (expandable polystyrene (EPS) beads, white and silver) but come from different manufacturers, and the finished product is the same, differing only in density. The EPS70 […]
Daemstatt Cellulose fibre insulation
This EPD is a core EPD for the European market. Covering the environmental impacts of the loose fill cellulose insulation products over the complete lifecycle from ‘Cradle to grave’ The LCA is carried out by Agrodome, [avniR] by cd2e and WeLOOP, based on the process and production data provided by 14 participating cellulose insulation producing […]
Isover SpaceSaver Insulation
100-200mm Isover Spacesaver glass mineral wool
