These products are a mix of fatty imidazoline derivates and amidoamines designed for fast-breaking emulsions with varying viscosity, and can be used with both naphthenic and paraffinic bitumen. They are produced and supplied, by Chemoran, in liquid form. They are usually supplied to customers in returnable/re-useable intermediate bulk containers (IBCs). The rapid set emulsifiers are […]
GAP, MDC, CPM-P, TT, TLC Mixing Grade Emulsifiers
These products are a mix of fatty imidazoline derivatives and amidoamines designed for bitumen emulsions used in the manufacture of mixing grade bitumen emulsions for cold mixes, grave emulsion and microsurfacing with either paraffinic or naphthenic bitumen. They are produced and supplied, by Chemoran, in liquid form. They are usually supplied to customers in returnable/re-useable […]
TPH and XTX(R) Adhesion Agents
These products are a mix of fatty imidazoline/amidoamine derivatives and polyethylene amines designed for use as adhesives agents in asphalt mixtures, to ensure a better bitumen/aggregate bond. They are produced and supplied, by Chemoran, in liquid form. They are usually supplied to customers in returnable/re-useable intermediate bulk containers (IBCs). The adhesion agents are manufactured by […]
CDML bitumen additive
CDML is a bitumen additive that is used to improve the cohesion build-up of cold micro-surfacing asphalt made with paraffinic bitumen. It can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing applications. It is produced and supplied, by Chemoran, in liquid […]
Sopro FugenEpoxi plus
Reactive resins based on epoxy resin, filled and/or aqueous filled. The reactive resins are manufactured in a two component process using reactively-diluted epoxy resins and polyamines. The aqueous systems can be formulated as aqueous dispersions on the resin or hardening agent side. They comply with multiple, often specific tasks in the construction, fitting and repair […]
CWM and CWM-BG1 bitumen additives for warm-mix asphalt
CWM and CWM-BG1 are surface-active agents used as bitumen additives in the manufacture of warm-mix asphalt, in the road construction industry. The addition of these additives enables asphalt producers to lower their mixing temperature by the order of 35°C, compared to the temperatures normally used to make the more conventional “hot-mix” asphalt. Both CWM and […]
Aquaroc
A cement plasterboard with additional hardness for partitions and ceilings for environments with very high humidity.