The Banagher Double-Tee can span up to 30 metres. The Double-Tee beams are typically used in buildings, multi-storey car parks, reservoirs and sporting facilities where long spans are required without central supports. The concrete comprises specialised cements, aggregates and water. Reinforcing steel has a recycled content of 92% recycled steel.
Moore Concrete Ox Strain concrete strainer post
Reinforced concrete Ox Strain Posts are octagonal shaped strainer posts and are used for rigid support for agricultural fencing. Further information at: https://www.moore-concrete.com/agriculture/ox-strain-posts/.
Moore Concrete Water Troughs
Moore Concrete manufacture a comprehensive range of quality precast concrete Water Troughs (also known as drinkers) ranging in capacity from 15 Gallon (68 litres) up to 500 Gallon (2270 litres). This EPD is an average of the nine water trough sizes. It is based on an average steel content of 8.07 kg per m3 of […]
Moore Concrete Ox Post – intermediate concrete fencing post
Reinforced concrete Ox Posts are used for as fencing posts for boundary fencing. A key feature is the fixing strip in the middle of the 75mm front face to allow wire to be stapled directly into the post. Further information at: https://www.moore-concrete.com/agriculture/ox-post/
IMS Recovered Aggregate and Sand
This EPD is carried out for the IMS Recovered Aggregate and Sand. The material components are aggregates and sands arising from construction and demolition wastes, and nonhazardous soil and granular excavation waste. The materials produced are aggregates and fine to coarse sands, for use as aggregates. this covers the following product designations: 10 mm graded aggregate (EN13242 […]
Irish Cement Bagged CEM II/A-L
Life cycle stages/system boundaries: The EPD covers the product stage (“cradle to gate”, A1-A3). The selected system boundaries comprise the production of cement including raw material extraction up to the finished product at the factory gate. The following figure shows the system boundaries, in accordance with EN 16908:2017,
Irish Cement Bulk CEM II/A-L
Life cycle stages/system boundaries: The EPD covers the product stage (“cradle to gate”, A1-A3). The selected system boundaries comprise the production of cement including raw material extraction up to the finished product at the factory gate. The following figure shows the system boundaries, in accordance with EN 16908:2017.
Irish Cement CEM 1
Life cycle stages/system boundaries: The EPD covers the product stage (“cradle to gate”, A1-A3). The selected system boundaries comprise the production of cement including raw material extraction up to the finished product at the factory gate. The following figure shows the system boundaries, in accordance with EN 16908:2017.
Breedon Cement: CEM II/A-L 52,5 N bulk cement
This is a Cradle to Gate EPD. The Modules that are declared are shown in the table below. As cement is an intermediate construction product – in that it becomes physically integrated into the product of which it is a component – it is generally not possible to provide information about the environmental impacts of […]
Cemcor CEM II/A-L 32,5 R bagged cement Paper and Plastic Bag
The cement is manufactured at the Cemcor cement factory at Cookstown, Co. Tyrone, Northern Ireland, in accordance with B.S. EN 197-1:2011, Compositions, specifications and conformity criteria for common cements. The main material components of the cement are clinker, ground limestone and gypsum. A small amount of bypass dust is added as well as a chromate-reducing […]
Cemcor CEM II/A-L 42,5 R bulk cement
The cement is manufactured at the Cemcor cement factory at Cookstown, Co. Tyrone, Northern Ireland, in accordance with B.S. EN 197-1:2011, Compositions, specifications and conformity criteria for common cements. The main material components of the cement are clinker, ground limestone and gypsum. A small amount of bypass dust is added as well as a chromate-reducing […]
Cemcor CEM I 52,5 N bulk cement
The cement is manufactured at the Cemcor cement factory at Cookstown, Co. Tyrone, Northern Ireland, in accordance with B.S. EN 197-1:2011, Compositions, specifications and conformity criteria for common cements. The main material components of the cement are clinker, ground limestone and gypsum. A small amount of bypass dust is added as well as a chromate-reducing […]
ASC (Anti-stick agent)
The Chemoran Anti-Stick agent, ASC, is a surface active agent that prevents bituminous mixtures from sticking to the beds of delivery trucks, hoppers, roller drums, sleighs of surfacing trucks and hand tools such as shovels, rakes, buckets, etc. ASC is supplied in liquid form, usually in returnable/re-useable intermediate bulk containers (IBCs). The anti-stick agent is […]
TCMC, TNB, X2TDC(R), TDC(R), TDC-HV2 & TDC-HV3 Rapid Set Emulsifiers
These products are a mix of fatty imidazoline derivates and amidoamines designed for fast-breaking emulsions with varying viscosity, and can be used with both naphthenic and paraffinic bitumen. They are produced and supplied, by Chemoran, in liquid form. They are usually supplied to customers in returnable/re-useable intermediate bulk containers (IBCs). The rapid set emulsifiers are […]
GAP, MDC, CPM-P, TT, TLC Mixing Grade Emulsifiers
These products are a mix of fatty imidazoline derivatives and amidoamines designed for bitumen emulsions used in the manufacture of mixing grade bitumen emulsions for cold mixes, grave emulsion and microsurfacing with either paraffinic or naphthenic bitumen. They are produced and supplied, by Chemoran, in liquid form. They are usually supplied to customers in returnable/re-useable […]
TPH and XTX(R) Adhesion Agents
These products are a mix of fatty imidazoline/amidoamine derivatives and polyethylene amines designed for use as adhesives agents in asphalt mixtures, to ensure a better bitumen/aggregate bond. They are produced and supplied, by Chemoran, in liquid form. They are usually supplied to customers in returnable/re-useable intermediate bulk containers (IBCs). The adhesion agents are manufactured by […]
CDML bitumen additive
CDML is a bitumen additive that is used to improve the cohesion build-up of cold micro-surfacing asphalt made with paraffinic bitumen. It can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing applications. It is produced and supplied, by Chemoran, in liquid […]
Breedon Cement: CEM II/A-L 42,5 N bulk cement
This is a Cradle to Gate EPD. The cement is manufactured at the Breedon Cement Ireland factory at Kinnegad, Co. Westmeath, Ireland, in accordance with I.S. EN 197-1:2011, Compositions, specifications and conformity criterial for common cements. The main material components of the cement are clinker, ground limestone and gypsum. A small amount of bypass dust […]